3D Print Support Generator

Generate support structures for 3D printing vector models. Optimize for multicolor prints on Bambu Lab, Prusa, and other FDM printers.

Support Settings

5mm
Light (5%)15%Heavy (50%)
45°

Overhangs steeper than this angle will get supports

Support Types

  • Grid: Traditional lattice supports, easy to remove
  • Tree: Organic supports, uses less material, harder to remove

Recommended Settings

Contact Z Distance:0.2mm
Support Interface:Enabled
Support Pattern:Lines

Preview

Upload an STL or 3MF file to preview

Estimated Material

Support Material~15g
Print Time Increase~25 min

Tip: Use tree supports for organic shapes and grid supports for geometric models. Enable "Support Interface" for cleaner surface finish.